DMX recording with sc lan DMX 512 I/O

[remko]

Hello

We have the sc lan DMX 512 I/O from stumpfl and dmx out works well.
But i can't activate the DMX in.....for recording DMX from lightcomputer.


Regards,

Remko Smids

[Dirk Meyer]

Hello,

The first thing i would do is....

1. creat a new Standard Projekt under WP 4
2. go to the Device Manager (Geräte Manager) and add an SC LAN DMX Device
3. make a dopple Klick to the DMX Device#
4. Control the right IP Adresse from the DMX SCLAN Device
5. Plug your light Pult to the DMX LAN Modul
6. Click the DMX Button and a new Window comes
7. Click DMX In Monitoring
8. Control your Device and Open the DMX Channel on your Light Desk
9. if everything is OK you see the DMX Channel go Up when you use your Light Desk


10. Go to Headline- Timline- DMX Record and Start
11. Break when you are ready with your Light
12. A new Timeline with your Light Control are create by WP4 themself

if its not work Control your Network !

Dirk

[remko]

Hello Dirk

Thanks for the reaction.
I work with 3.7....
What works is the monitoring of the kiss box i can see input on this screen.
But i can't select dmx input in the devicepool....
Can only select dmx out.....

Regards

Remko

[Dirk Meyer]

You must use the SC LAN DMX Device not the normal DMX Device !!!

[remko]

Hello Dirk

I know i have to select the SC LAN device.

I have had contact with one of programmers from stumpfl, and he told me that it the sc lan box will
only work with wings 4.
With wings 3 it will only work as in output box :-(

Thanks for your help.

[Dirk Meyer]

Oh Sorry, that is right !

The SC LAN DMX Box works in WP 3 only in DMX OUT Mudus. But the Sunlight DMX In Device works very good.

At the moment there is also a small Problem in WP4 but i here that the bug is fixt. And the next Update comes hoply very soon.

Dirk